Share

Close

Monthly Payment Disclaimer

Close

The values presented on this site are for estimation purposes only. Your actual payment may vary based on several factors such as down payment, credit history, final price, available promotional programs and incentives. Applicable tag, title, destination charges, taxes and other fees and incentives are not included in this estimate.

Dealer Spike is not responsible for any payment data presented on this site. Please verify all monthly payment data with the dealership’s sales representative.

2020 Caterpillar Skid Steer Loaders 262D3

  • Used-2020-Caterpillar-Skid Steer Loaders 262D3
  • Used-2020-Caterpillar-Skid Steer Loaders 262D3
  • Used-2020-Caterpillar-Skid Steer Loaders 262D3
  • Used-2020-Caterpillar-Skid Steer Loaders 262D3
  • Pre-owned
  • ddequipment
  • U10862
  • Skid Steers
  • General
2020 Cat 262D3 skid loader. 2 speed, cab, heat, AC. Hydraulic coupler.
  • Pre-owned
  • U10862
  • 2020
  • Caterpillar
  • Skid Steer Loaders 262D3
  • Skid Steers
  • General
  • 203582
  • Cat
  • Model: C3.3B DIT (turbo)
  • Gross Power - SAE J1995: 74.3 HP | Net - SAE 1349: 72.9 HP | Net - ISO 9249: 73.7 HP | Net Flywheel: 72.9 HP | Hydraulic Flow - High Flow XPS - Hydraulic (Calculated): 76 HP | Hydraulic Flow - Standard - Hydraulic (Calculated): 44 HP
  • Peak - 1,500 rpm - SAE J1995: 195 ft·lbf
  • 3.7 in
  • 4.7 in
  • 203 in³
  • 49.2 in
  • Inside Cab: 81 dB(A) | Outside Cab: 101 dB(A)
  • Travel - Forward or Reverse - Two Speed Option: 11 mile/h | Travel - Forward or Reverse - One Speed: 7.7 mile/h
  • Rated Operating Capacity: 2700 lb | Tipping Load: 5400 lb | Breakout Force - Tilt Cylinder: 7355 lb
  • Standard - Loader Hydraulic Flow: 23 gal/min | High Flow XPS - Maximum Loader Hydraulic Flow: 32 gal/min
  • Hydraulic Flow - High Flow XPS - Loader Hydraulic: 4061 psi | Hydraulic Flow - Standard - Loader Hydraulic: 3335 psi
  • Reach - Maximum Lift/Dump: 30.9 in | Clearance at Maximum Lift and Dump: 93.7 in | Departure Angle: 26° | Bumper Overhang - Rear Axle: 42.6 in | Maximum Dump Angle: 51° | Rack Back Angle - Maximum Height: 84° | Bucket Pin Reach - Maximum Lift: 15.5 in | Maximum Reach - With Arms Parallel to Ground: 50.9 in
  • Radius from Center - Bucket: 85.9 in | from Center - Coupler: 55.2 in | from Center - Machine Rear: 71.1 in
  • Top of Cab: 83.1 in | Bucket Pin - Maximum Lift: 124.9 in | Bucket Pin - Carry Position: 7.9 in
  • With Bucket on Ground: 146.2 in | Without Bucket: 117.9 in
  • Vehicle over Tires: 66 in
  • Maximum: 157.8 in
  • 8.9 in
  • Engine Crankcase: 3 gal (US) | Hydraulic System: 13.7 gal (US) | Hydraulic Tank: 10.3 gal (US)
  • Chain - Each Side: 3.3 gal (US)
  • Tank: 27.7 gal (US)
  • 3.7 gal (US)
  • Operating: 8296 lb

Get an Estimate for Your Payment

  • Estimated Payment
  • Calculation is estimate only.

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.